The strongest of Schechtl’s motorized plate shears. Driven by two motors. It creates the optimal balance of the cutting power throughout the entire working length. This means much easier guiding of the cutter bar, which in turn greatly increases the cutting precision. The cutting material tray can be perfectly adapted to suit the material flow in your workshop – simply select the tilting table version which deposits sheets towards the front or towards the rear ex works.
Benefits
Precise cutting quality
Double-edged reversible blades as standard
Tool-free adjustment of the cutting gap setting
Simple and precise material feed through support arms
Maintenance-free guide system
Optimum adjustment to production processes
High degree of flexibility in the production process through a wide range of variants
Automatic hold-down unit with slip-proof hard rubber insert holds the sheet firmly in position
Versions
MSC 125
MSC 150
MSC 200
MSC 250
The MSC 125 motorized plate shear cuts 4.00 mm steel sheets. With a working length of 1290 mm, it is ideal for confined spaces.
The MSC 150 motorized plate shear has a working length of 1540 mm and cuts 4.00 mm steel sheets.
The MSC 200 motorized plate shear has a working length of 2040 mm and cuts 4.00 mm steel sheets.
The MSC 250 motorized plate shear has a working length of 2540 mm and cuts 3.50 mm steel sheets.
MSC 310
MSC 400
MSC 450
The MSC 310 motorized plate shear has a working length of 3165 mm and cuts 3.00 mm steel sheets.
The motorized plate shear MSC 400 with a working length of 4040 mm offers a lot of flexibility when processing long sheets. The cutting capacity is 2.50 mm.
The MSC 450 motorized shear is particularly long at 4540 mm. This offers a high level of comfort when processing very long sheets. The cutting capacity is 1.50 mm steel.
Controls
BV
BVH
NC
NCH
From the front – The benefits of short paths
Shears with BV control system are
continuously operated from the front.
This applies to all functions:
loading the shears, depositing
and removing the cutting material.
Start the new job at the front – while the process continues at the rear
Shears with BVH control system are loaded with metal sheets from the front, while the cutting material is removed from the machine at the rear.
From the front – The benefits of short paths
Shears with NC control system are
continuously operated from the front.
This applies to all functions:
loading the shears, depositing
and removing the cutting material.
This control system is the ideal choice for the manufacture of challenging plates for roofs and exteriors as well as for reoccurring cutting profiles in industrial and serial-oriented trades.
Start the new job at the front – while the process continues at the rear
Shears with NCH control system are loaded with metal sheets from the front, while the cutting material is removed from the machine at the rear.
This control system is the ideal choice for the manufacture of challenging plates for roofs and exteriors as well as for reoccurring cutting profiles in industrial and serial-oriented trades.
Series equipment
Subject to change.
Steel shear blades, double-edged
Cutting gap adjustment
Angular stop 1000 mm left and right
Support arms 1000 mm
A helping hand for the perfect cut:
Sheet metal slide
Three-sided safety cage
Foot switch
Analogue position indicator
Manual backgauge 0-750 mm + tilting table with front delivery
Manual backgauge 0-750 mm + tilting table with rear delivery
Programmable control unit with digital display
Motorized backgauge 0-750 mm + tilting table with front delivery
All central functions of the plate shears are regulated by the programmable control:
Motorized backgauge 0-750 mm + tilting table with rear delivery
Add-ons
- Optimise your MSC
Stainless steel shear blades
Electronic position indicator
Cutting gap illumination via LED
Contact hub counter
pneumatic hold-down unit
Blank wagon (load capacity 1,000 kg)
Mitre angle limit
Light barrier as a safety device
Technical data
Subject to change
DOWNLOADS
YOU MIGHT ALSO BE INTERESTED IN ...
Bending
MAE
Extremely high bending capacity thanks to powerful spindle drive
Click System as standard – for individual tool mounts
Minimised set-up times and rapid bending sequences
Flexible: special tools can easily be retrofitted at any time
Uniform bending precision over the entire length
Bending
UKV
Segments with the original Schechtl quick clamping system
Tool-free adjustment of all segments supplied in the 3 areas lower, bending and clamping beam
Bending angle limitation for uniform, recurring bending operations
Quick, tool-free adjustment of the clamping beam clamping pressure
Tool-free adjustment of the bending beam lowering
Foot pedal for free-hand clamping of the workpiece
Practical: storage tray for the segments
Storage box for accessories and tools that also serves as a sheet support
4 swivel castors with locking brake for mobile use in the workshop
