Bending
MAB
Extremely high bending capacity
Short bending times through extremely high swivel speed
Time-saving through 1-man operation
Minimal maintenance effort
Versatile through a comprehensive range of accessories
The Schechtl MSB is the reinforced version of the SMT. It is even more solidly constructed than the SMT, which means higher cutting performance. The cutting material tray can be perfectly adapted to suit the material flow in your workshop – simply select the tilting table version which deposits sheets towards the front or towards the rear ex works.
Benefits
Precise cutting quality – even with thicker sheet metal
High-quality, durable shear blades
Optimum adjustment to production processes
High degree of flexibility in the production process through a wide range of variants
Automatic hold-down unit with slip-proof hard rubber insert holds the sheet firmly in position
Versions
MSB 100
MSB 150
MSB 200
MSB 250
The MSB 100 motorized plate shear is solidly built and cuts 4.00 mm steel. With a working length of 1040 mm, it is suitable for even the smallest workshop.
The MSB 150 motorized plate shear is solidly built and cuts 3.50 mm steel. With a working length of 1540 mm, it is particularly suitable for confined spaces.
The MSB 200 motorized plate shear has a working length of 2040 mm. It is solidly built and cuts 3.00 mm steel sheets.
The MSB 250 motorized plate shear is of solid construction. It has a working length of 2540 mm and cuts 2.50 mm steel sheets.
MSB 310
The MSB 310 motorized plate shear has a working length of 3140 mm and cuts 2.00 mm steel sheets.
Controls
BV
BVH
NC
NCH
From the front – The benefits of short paths
Shears with BV control system are
continuously operated from the front.
This applies to all functions:
loading the shears, depositing
and removing the cutting material.
Start the new job at the front – while the process continues at the rear
Shears with BVH control system are loaded with metal sheets from the front, while the cutting material is removed from the machine at the rear.
From the front – The benefits of short paths
Shears with NC control system are
continuously operated from the front.
This applies to all functions:
loading the shears, depositing
and removing the cutting material.
This control system is the ideal choice for the manufacture of challenging plates for roofs and exteriors as well as for reoccurring cutting profiles in industrial and serial-oriented trades.
Start the new job at the front – while the process continues at the rear
Shears with NCH control system are loaded with metal sheets from the front, while the cutting material is removed from the machine at the rear.
This control system is the ideal choice for the manufacture of challenging plates for roofs and exteriors as well as for reoccurring cutting profiles in industrial and serial-oriented trades.
Series equipment
Subject to change.
Steel shear blades
Supporting plates with 10 mm scale
Three-sided safety cage
Foot switch
Analogue position indicator
Manual backgauge 0-750 mm + tilting table with front delivery
Manual backgauge 0-750 mm + tilting table with rear delivery
Programmable control unit with digital display
All central functions of the plate shears are regulated by the programmable control:
Motorized backgauge 0-750 mm + tilting table with front delivery
Motorized backgauge 0-750 mm + tilting table with rear delivery
Add-ons
- Optimise your MSBStainless steel shear blades
Electronic position indicator
Blank wagon (load capacity 300 kg)
Blank wagon (load capacity 1,000 kg)
Cutting gap illumination via LED
Contact hub counter
pneumatic hold-down unit
Mitre angle limit
Light barrier as a safety device
Technical data
Subject to change
DOWNLOADS
YOU MIGHT ALSO BE INTERESTED IN ...
Bending
MAB
Extremely high bending capacity
Short bending times through extremely high swivel speed
Time-saving through 1-man operation
Minimal maintenance effort
Versatile through a comprehensive range of accessories
Bending
UKV
Segments with the original Schechtl quick clamping system
Tool-free adjustment of all segments supplied in the 3 areas lower, bending and clamping beam
Bending angle limitation for uniform, recurring bending operations
Quick, tool-free adjustment of the clamping beam clamping pressure
Tool-free adjustment of the bending beam lowering
Foot pedal for free-hand clamping of the workpiece
Practical: storage tray for the segments
Storage box for accessories and tools that also serves as a sheet support
4 swivel castors with locking brake for mobile use in the workshop